Maximum hoist capacity: 3300 kg. Maximum reach with manual extension: 5750 mm.

Single- boom, compact HDS loader crane mounted on light trucks and the smallest HGV trucks. The crane is constructed on the basis of top-class components, including proportional distributors and reinforced hydraulic hoses, supplied by leading European and American manufacturers.

The machine is equipped with extension cylinder double-action locks and spring locks that protect support beams against uncontrolled sliding out.

Each BEFARD BF crane can be retrofitted with a wide range of different working accessories, such as:

  • bulk material grab buckets,
  • hydraulic and electric winches,
  • hydraulic rotators,
  • digging buckets,
  • multi-purpose buckets,
  • crane grab buckets,
  • multi-purpose grabs and grippers.
The CE version meets the essential requirements of the Machinery Directive 2006/42/CE and Directive 2014/30/EU
STOP safety switch
Double-action locks for extension cylinders
Reinforced hydraulic hoses
Manual support, optionally lowered (up-down) hydraulically
Spring protections to protect the support beams against uncontrolled sliding out
1,12 t hook
Radio control


Lifting torque 57 kNm 57 kNm 56 kNm
Maximum hoist capacity 3300 kg 3250 kg 3200 kg
Hydraulic extension 3100 mm 4450 mm 5750 mm
Maximum reach with manual extension 5750 mm 6750 mm 6750 mm
Height of the crane 2200 mm 2200 mm 2200 mm
Transport width 2000 mm 2000 mm 2000 mm
Foot extension 5020 mm 5020 mm 5020 mm
Slewing angle 210°-360° 210°-360° 210°-360°
Swivel torque 7,6 kNm (25,5 MPa) 7,6 kNm (25,5 MPa) 7,6 kNm (25,5 MPa)
Extension upward elevation angle - - -
Downward drop angle - - -
Working pressure 230 bar 230 bar 230 bar
Pump operating pressure 280 bar 280 bar 280 bar
Flow pump 15-18 l/min
pump capacity after installation at 600 rpm.
15-18 l/min
pump capacity after installation at 600 rpm.
15-18 l/min
pump capacity after installation at 600 rpm.
Weight 530 kg 540 kg 550 kg

Recommended pump flow, given in the card, may change depending on the power supply and the specification of the device that will be mounted to the crane. In standard applications, this is the maximum value.

The device meets the requirements of the Machinery Directive 2006/42/EC and Directive 2014/30/EU

All BEFARD devices are covered by a 12-month warranty.

The warranty will not be valid if the crane uses a power supply other than that of the Binotto manufacturer (excluding electric and diesel power units).

BF 5702.12 angBF 5702A.12 angBF 5702B.11 ang


+48 33 821 96 92