BEFARD XF 11002

Maximum hoist capacity: 4930 kg. Maximum reach with manual extension: 12250 mm.

BEFARD XF is a series of double-boom loader cranes designed to be mounted on light trucks such as: Iveco 50c15, Renault Mascot and smaller HGV trucks such as Mercedes Atego, Iveco Eurocargo and others. Depending on the specific configuration, BEFARD XF cranes can be equipped with one, two, three or even four hydraulic extensions. The increased number of extensions enables the machine to work over longer distances.

Each BEFARD XF crane can be retrofitted with a wide range of different working attachments, such as:

  • bulk material buckets,
  • hydraulic and electric winches,
  • hydraulic rotators,
  • digging buckets,
  • multi-purpose buckets,
  • crane grab buckets,
  • multi-purpose grabs and grippers.
The CE version meets the essential requirements of the Machinery Directive 2006/42/CE and Directive 2014/30/EU
STOP safety switch
Monoblock distributor
Double-action locks for extension cylinders
Reinforced hydraulic hoses
Hydraulically lowered (up and down) supports on both sides
Spring protections to protect the support beams against uncontrolled sliding out
5,4 t hook
One side crane control
Sliding sleeves made of bronze
Radio controlled (optional)

Specification:

BEFARD XF1150211502 A11502 B11502 C
Lifting torque 11,1 tm 10,7 tm 10,5 tm 10,0 tm
Maximum hoist capacity 4930 kg 4820 kg 4690 kg 4580 kg
Hydraulic extension 6050 mm 7900 mm 9950 mm 12050 mm
Maximum reach with manual extension 12250 mm
optional
14200 mm
optional
16150 mm
optional
16050 mm
optional
Height of the crane 2200 mm 2200 mm 2200 mm 2200 mm
Transport width 2280 mm 2280 mm 2280 mm 2280 mm
Foot extension 5400 mm 5400 mm 5400 mm 5400 mm
Slewing angle 180°-390° 180°-390° 180°-390° 180°-390°
Swivel torque 17,6 kNm (30 MPa) 17,6 kNm (30 MPa) 17,6 kNm (30 MPa) 17,6 kNm (30 MPa)
Extension upward elevation angle 80° 80° 80° 80°
Downward drop angle 65° 65° 65° 65°
Working pressure 300 bar 300 bar 300 bar 300 bar
Pump operating pressure 350 bar 350 bar 350 bar 350 bar
Flow pump 30 l/min
required
30 l/min
required
30 l/min
required
30 l/min
required
Weight 1420 kg 1550 kg 1670 kg 1800 kg

The device meets the requirements of the Machinery Directive 2006/42/EC and Directive 2014/30/EU

All BEFARD devices are covered by a 12-month warranty.

The warranty will not be valid if the crane uses a power supply other than that of the Binotto manufacturer (excluding electric and diesel power units).

 
 
 
 
XF 11002.13.ANGXF 11002A.13.ANGXF 11002B.13.ANGXF 11002C.12.ANG

Downloads:

+48 33 821 96 92