BEFARD XF is a series of double-boom loader cranes designed to be mounted on light trucks such as: Iveco 50c15, Renault Mascot and smaller HGV trucks such as Mercedes Atego, Iveco Eurocargo and others. Depending on the specific configuration, BEFARD XF cranes can be equipped with one, two, three or even four hydraulic extensions. The increased number of extensions enables the machine to work over longer distances.
Each BEFARD XF crane can be retrofitted with a wide range of different working attachments, such as:
- bulk material buckets,
- hydraulic and electric winches,
- hydraulic rotators,
- digging buckets,
- multi-purpose buckets,
- crane grab buckets,
- multi-purpose grabs and grippers.
The CE version meets the essential requirements of the Machinery Directive 2006/42/CE and Directive 2014/30/EU STOP safety switch Monoblock distributor Double-action locks for extension cylinders Reinforced hydraulic hoses Hydraulically lowered (up and down) supports on both sides Spring protections to protect the support beams against uncontrolled sliding out 3 t hook One side crane control Sliding sleeves made of bronze Radio controlled (optional) Specification:
BEFARD XF 7202 7202 A 7202 B 7202 C Lifting torque 6,9 tm 6,9 tm 6,9 tm 6,9 tm Maximum hoist capacity 3900 kg 3800 kg 3700 kg 3600 kg Hydraulic extension 5300 mm 7200 mm 9200 mm 11100 mm Maximum reach with manual extension 9200 mm 11100 mm 12800 mm 12700 mm Height of the crane 1970 mm 1970 mm 1970 mm 1970 mm Transport width 2200 mm 2200 mm 2200 mm 2200 mm Foot extension 5400 mm 5400 mm 5400 mm 5400 mm Slewing angle 180°-390° 180°-390° 180°-390° 180°-390° Swivel torque 9,9 kNm (30 MPa) 9,9 kNm (30 MPa) 9,9 kNm (30 MPa) 9,9 kNm (30 MPa) Extension upward elevation angle 70° +16° 70° +16° 70° +16° 70° +16° Downward drop angle 65° 65° 65° 65° Working pressure 260 bar 260 bar 260 bar 260 bar Pump operating pressure 350 bar 350 bar 350 bar 350 bar Flow pump 20 l/min
required20 l/min
required20 l/min
required20 l/min
requiredWeight 800 kg 840 kg 870 kg 890 kg The device meets the requirements of the Machinery Directive 2006/42/EC and Directive 2014/30/EU
All BEFARD devices are covered by a 12-month warranty.
The warranty will not be valid if the crane uses a power supply other than that of the Binotto manufacturer (excluding electric and diesel power units).
Downloads: