BEFARD XF is a series of double-boom loader cranes designed to be mounted on light trucks such as: Iveco 50c15, Renault Mascot and smaller HGV trucks such as Mercedes Atego, Iveco Eurocargo and others. Depending on the specific configuration, BEFARD XF cranes can be equipped with one, two, three or even four hydraulic extensions. The increased number of extensions enables the machine to work over longer distances.
Each BEFARD XF crane can be retrofitted with a wide range of different working attachments, such as:
- bulk material buckets,
- hydraulic and electric winches,
- hydraulic rotators,
- digging buckets,
- multi-purpose buckets,
- crane grab buckets,
- multi-purpose grabs and grippers.
The CE version meets the essential requirements of the Machinery Directive 2006/42/CE and Directive 2014/30/EU STOP safety switch Monoblock distributor Double-action locks for extension cylinders Reinforced hydraulic hoses Hydraulically lowered (up and down) supports on both sides Spring protections to protect the support beams against uncontrolled sliding out 8,5 t hook One side crane control Sliding sleeves made of bronze Radio controlled (optional) Specification:
BEFARD XF 8502 8502 A 8502 B 8502 C Lifting torque 8,6 tm 8,3 tm 8,0 tm 7,9 tm Maximum hoist capacity 4020 kg 3940 kg 3820 kg 3770 kg Hydraulic extension 5550 mm 7500 mm 9400 mm 11300 mm Maximum reach with manual extension 11300 mm 13200 mm 13200 mm 13200 mm Height of the crane 1970 mm 1970 mm 1970 mm 1970 mm Transport width 2240 mm 2240 mm 2240 mm 2270 mm Foot extension 5400 mm 5400 mm 5400 mm 5400 mm Slewing angle 180°-390° 210°-360° 180°-390° 180°-390° Swivel torque 11,6 kNm (31 MPa) 11,6 kNm (31 MPa) 11,6 kNm (31 MPa) 11,6 kNm (31 MPa) Extension upward elevation angle 70° +16° 70° +16° 70° +16° 70° +16° Downward drop angle 65° 65° 65° 65° Working pressure 275 bar 275 bar 275 bar 275 bar Pump operating pressure 350 bar 350 bar 350 bar 350 bar Flow pump 25 l/min
required25 l/min
required25 l/min
required25 l/min
requiredWeight 900 kg 1000 kg 1050 kg 1130 kg The device meets the requirements of the Machinery Directive 2006/42/EC and Directive 2014/30/EU
All BEFARD devices are covered by a 12-month warranty.
The warranty will not be valid if the crane uses a power supply other than that of the Binotto manufacturer (excluding electric and diesel power units).
Downloads:
BEFARD_XF
